|
Other Spares
|
| |
|
| |
|
| Rare type 24c ATE dial. Black
oxidised or painted brass finger plate. Mint working condition.
Fits 150, 200 series, 300 series and many others. |
£25 |
| As above 24c dial but in used
working condition |
£15 |
Unusual and rare ATE dial. Part number L39509. Black plastic finger plate
which incorporates the numbers in cupped recesses. Fascinating mechanism
with partial sun and planet gearing .
Fits 150, 200 series, 300, 700 series and many others. |
£30 |
| |
|
User instruction booklet in colour for BT answer recording machine type
101A. Dated I would guess in the late 70's.
Poorly stored and dirty. But great if you have a 101A. |
£1 |
| Dial cord No 6/13E, 8" long unused in its
original wrappings. Proper whipped ends, not spade connections. Although not
intended for the candlestick telephone, it would make an ideal replacement. |
£12 |
Cord No 510742. This is a cloth covered 4 core flexible cord coloured
"Grebe". Grebe is an attractive greyish brown. It has spade terminals at one
end, and push-on connectors at the other. The overall length is about 54
inches or 1370mm. Would make an ideal handset cord.
New old stock in its original wrappings |
£12 |
| Bright red drop cord type 386. Red cloth covered 3 core cord. Could be
adapted as a fine red handset cord. Approximately 5 feet or 1600mm long.
Mint unused. Few Only |
£10 |
| Bright green drop cord as above. Few Only |
£10 |
|
Bright green drop cord as above but
type 394. Approximately 2 foot 6 inches or 760mm long. Few only |
£8 |
Ivory curly cord for the handset of an unknown BT telephone from the 70's.
(Not 700 series). Strain relief's at each end Push fit connectors.
Unused |
£1 each or 10 for £7 |
| Jack Unit 1A. This is a small grey box which contains the elements of a
telephone. It does not include a bell, dial, or hand set. The circuit,
diagram (included) is similar to a 706. Circa 1970's |
£8 |
Incredible find. Mint Unused!!!
Line cord suitable for early magneto
telephones such as the Ericsson skeleton.
This is an original cord from the early 1900's. It was probably made by
Ericsson or their supplier.
It is about 3 metres or 10 feet long, braided with green cloth with red
cotton binding at each end. There are seven colour coded cores, all
correctly whipped with copper wire.
Make no mistake, this is original and mint. Museum quality. |
£70 |
Another Incredible find.
Mint Unused!!!
Handset cord suitable for early magneto
telephones such as the Ericsson skeleton, wooden wall and corporation types.
This is an original cord from the early 1900's. It was probably made by
Ericsson or their supplier.
It is about 1.5 metres or 5 feet long, braided with green cloth with green
cotton binding at each end. There are four cores, all correctly whipped
with copper wire. The four colour coded cores are the correct length and
have the correct extensions for most early Ericsson type handsets with a press to
talk switch. Note it has 4 cores, not 5 cores
Make no mistake, this is original and mint. Museum quality. |
£110 |
| 3T receiver. Special type with inductive
loop coil for compatibility with hearing aids. Item code 877095. Unused in
original wrappings. Replaces the 4T in a 700 (and others) handset. Rare |
£15 |
Ring back memories
with
an old Bakelite
telephone
I no longer accept cheques.